| Isopure Water (ISO-RO6ALK) 6 Stage Alkaline Reverse Osmosis System 50 GPD - No - Pump - Chrome - - - White - Tip |
 Get the best of both worlds with high quality filtration and alkaline water without the need of spending thousands of dollars on an alkaline filtration system. Other alkaline systems can easily cost your thousands of dollars. Our system will save you the headache of looking for a system that can not only do the same thing but it will do a better job at it. Our system uses a special alkaline filter to give you a better pH and a very low ORP (oxygen reduction potential). This means your body is going to be closer to its naturally state which is at a pH of 7.4; and with a lower ORP, our water will be more of an antioxidant. Drinking lots of water will lead to naturally detoxifying your body, keep your body better hydrated; with a possibility of a natural weight loss (due to proper hydration). This reverse osmosis system is capable of removing over 90%-99% of all TDS (total dissolved solids) and 99% of all organics. Then after the contaminants have been removed, we use an alkaline filter to add only the good minerals back into the water. With it's combination of a Watts Alkaline Filter, you'll be able to get high quality filtration and great quality alkaline water. Watts' Alkaline filter is made in the USA with a filter life of 3,000 gallons or 18 months. This is the only alkaline water filter that has experience backed by 40+ years in the water industry. Our reverse osmosis system has been especially plumbed to this particular alkaline filter to give you the best result with the best quality available. Easy to install Affordable replacement filters Great tasting water Specifications: Dimensions: 15"L x 6"D x 18"H RO Unit; 11" x 14" Storage Tank Unit Weight: 28 Lbs. Recommended Potable Water Supply Condition: Max. Total Dissolved Solids (TDS) : <2,000 ppm Water Pressure Range : 40-100psi (2.8 bar) required Min. Inlet Water Pressure : 40 psi (2.8 bar) required Water Temperature Range : 40-85�F (4.5-30�C) Water pH Range : 4-11 1st Stage : Sediment Depth Filter Part Number: 1227867-V (5 Micron) (Polypropylene Melt-blown Depth Filter) Specifications: Dimension: 2.5" Dia. x 10" Max. Flow : 1.0 GPM Max. Pressure : 125 psi Max. Temperature : 125�F (52�C) Service Life : 5,000 gallons Features: 100% Polypropylene NSF Certified Material Particle Removal (dirt, sediment, rust particles, and other particulates) Improving Water Clarity, Taste, and Odor Greater Dirt-holding Capacity with Multi-layers Gradient Design High Flow Rate, Low Pressure Drop 2nd Stage : Granulated Activated Carbon Filter Part Number : 2510CC (Granulated Coconut Shell Carbon 12x40 mesh size) Specifications: Dimensions: 2.5" Dia. x 9.75" Max. Flow: 0.75 GPM Max. Pressure: 125 psi Max. Temperature: 125�F (52�C) Service Life: 2,500 Gallons Features: 100% Coconut Base Carbon NSF Certified Material Chlorine, Odor and Bad Taste Removal Tremendous Surface Area Resulting From Its Porous Structure Maximum Adsorption Process Great Removing Volatile Organic Carbon Compounds (insecticides and/or pesticides) High Flow Rate, Low Pressure Drop 3rd Stage: Coconut Shell Carbon Block Filter Part Number: HQCBC-10-5 (5 Micron) Specifications: Dimensions: 2.5" Dia. x 9.75" Max. Flow: 1.0 GPM Max. Pressure: 125 psi Max. Temperature: 125�F (52�C) Service Life: 2,500 Gallons Features: 100% Coconut Base Carbon NSF Certified Material Chlorine, Odor and Bad Taste Removal High Adsorptive Capacity and Efficiency Great Removing Volatile Organic Carbon Compounds (insecticides and/or pesticies) No Channeling No Release of Carbon Fines High Flow Rate, Low Pressure Drop 4th Stage : RO Membrane Filter Part Number : TW30-1812-50 (50 gallons per day) Specifications: Dimension: 1.75" Dia x 11.74" Up to a 98% Rejection Rate* Polyamide Thin-Film Composite Max. Pressure: 150 psig Max. Temperature: 113� (45�C) Max. Feed Flow Rate: 2 GPM Max. Feed Silt Density Index (SDI) : 5 pH Range: 2-11 Service Life: 2-3 years Features: Reduce TDS value in water Reduce 98% of dissolved minerals, salts and other chemical contaminates in potable water supply* Remove most harmful chemicals Reduce E.coli in potable water Remove most heavy metals Reduce TDS, Barium, Cadium, Hexavalen & Trivalent Chromium, Copper, Lead, Radium 226/228, Selenium, Fluoride, Nitrite, Nitrate (see owner manual for more details) 5th Stage : Alkaline Filter Part Number : F105377 Specifications: Dimension: 2.5" Dia. x 12" Max. Flow: 0.5 GPM (1.9 LPM) Max. Pressure: 100 psi Max. Temperature: 100�F (38�C) Min. Temperature: 35�F (2�C) Service Life: 3,000 gallons Features: Lower Oxygen Reduction Potential (ORP) Raise pH Proprietary multi level alkaline filter MADE IN THE USA 1/4" NPT Threaded connections 5th Stage : Inline Polish Filter Part Number : AIC RO (Granular Coconut Shell Carbon) Specifications: Dimension: 2" Dia. x 10" Max. Flow: 0.5 GPM (1.9 LPM) Max. Pressure: 100 psi Max. Temperature: 100�F (38�C) Min. Temperature: 35�F (2�C) Service Life: 2,500 gallons Features: Chlorine Taste and Odor Reduction NSF Certified and Particulate Class V Simple Basic Design with Best Efficiency High Grade NSF Certified Coconut Shell Carbon Include pre- and post filter pad No channeling or clogging 1/4" NPT Threaded connections Price: 499.99 |